Temperature Transmitter TT7S00-HR
TT7S00-HR is low cost Analog Linearized non-isolated 2-wire Head mount Transmitter, solder pads selection and potentiometer adjustments makes the Transmitter suitable for multi-range applications; the electronics is rated to withstand high temperature, protected by potting and housed in a rugged enclosure for reliability.
The Transmitter is sized for DIN B sensor heads with ergonomically placed terminals and potentiometers for ease of wiring and adjustments, the output is fully linear to temperature and load independent, with just 6.5V drop across the output, large loads can be connected in the loop.
For sensor break the unit can be configured for upscale or down scale output, sensor lead wires are compensated for up to 15 ohms per lead in 3W connection.
Overview
- Multi-Range design
- Output Linear to Temperature
- Analog Linearized for 0.1% Linearity
- Sized for DIN B heads and bigger
- Sensor break selection for upscale or downscale
- Protected Electronics rated to withstand high temperature
- Flat and compact housing
- Most cost effective
- Machine soldered Printed Circuit Boards
- Automated Testing and calibration check
- Strokes from 100 to 900mm
- Measurement: position, velocity, triaxial tilt, acceleration and vibration, electronics temperature
- CANopen output
- Self-aligning mounting mechanism
- Operating temperature: -40…+85°C
- IP67 protection
- Compliance with RoHS directive 2011/65/EU
- Output connector M12 – 5 poles male
